Summer Heat - Drink Plenty of Water and Communicate With Your Supervisors!

Good afternoon to all IDI employees:

Summer is upon us and the heat is getting turned up!  Just putting out a reminder of what to look for as far as heat exhaustion symptoms, prevention methods, etc.  We don't want our employees sustaining heat exhaustion type injuries as they are preventable.

Symptoms:
The symptoms of heat stress disorders are very slow to start, but increase in intensity if precautions are not taken. The onset of the initial symptoms are mild and usually involve headaches, thirst, tiredness and weakness. Heat stress can move to heat stroke, a life-threatening medical emergency, quickly when the body's natural cooling system breaks down and causes the body core temperature to rise and overheat the brain. Some of the symptoms of heat stroke are immense thirst, severe headaches, disorientation, dry/hot skin (no sweating) and possibly collapse.

Treatment/Prevention:
The following ideas may aid in combating heat stress disorders:
1. Employees accustomed to working in the heat are better candidates for job assignments where heat stress disorders may occur.
2. Until employees acclimate to the high temperatures, allow them for short frequent breaks to cool down.
3. If heat is affecting employees, it’s a good idea to rotate employees job tasks from the heat exposure area to a non-heat exposure area on a regular basis to help in avoiding heat stress symptoms.
4. Employees are encouraged to drink plenty of fluids (water, Gatorade, Powerade, etc.) to replace electrolytes. Water is actually the best choice. Employees should not drink any carbonated beverages (Coke, Pepsi, Energy drinks, etc.) as these only increase dehydration and give a false sense of being properly hydrated. Also, the use of alcohol the evening before the work shift, can lead to dehydration even before heat exposure.
4. Don't forget to protect your skin - wear sunscreen.

We need to keep an eye on each other and if an employee appears to be suffering from heat stress disorder, remove him or her from the heat and provide a cool, shaded place to rest and provide them with plenty of water. If the employee is disoriented or non-responsive, call for medical attention immediately, (911 in most areas). The goal is to recognize the hazards and symptoms of heat stress disorders and stop them before they occur. Remember, there is no better cure than prevention. Everybody working in the heat should be communicating and checking on each other

As always, if you are having to take extra breaks due to the extreme heat, you must notify your lead supervisor who in turn must contact your Superintendent.  

Should you have any questions regarding heat related stress, you are encouraged to call our Safety Director, Peter Graham at (847) 417-1689. 

Have a Safe Day!

Red Tape on All 3-Pronged Electrical Tools & Extension Cords as of 7/1/19!

Good morning to all I.D.I. employees:

We begin a new quarter for our Assured Grounding Conductor Program on Monday, 7/1/19.  We are to switch over our cords from green tape to red tape. To all Safety Advocates - please help keep our employees safe and help keep us OSHA compliant by following our assured grounding conductor program. Please inspect, test and color-code with red tape all 3-pronged electrical tools and extension cords. All electrical tools and cords need to be visually inspected. If you see any defects in the cords such as bare wires, severe kinks, missing or damaged ground prong, the cord pulling away from the plug end-housing, etc., then that tool or cord would need to be immediately removed from service and reported to your lead field supervisor. If your tool/cord passes the visual inspection, your next step is to test the cord with a receptacle tester. First, you should test the outlet that you will be plugging your cord into to ensure that it is properly wired. You should see 2 yellow lights lit up on your tester and the red light should be off. This means the outlet is working appropriately. Next, plug your cord into the outlet and then test the cord with the receptacle tester. Again, you should see the same light pattern as mentioned above and this would mean the cord passed the test and is safe to use. Any other light pattern means that there is a problem with the cord and the cord needs to be removed from service and reported to your lead field supervisor. If the cord passes the visual inspection and the cord tester test, you should then remove the previous quarter's green electrical tape and install the red electrical tape about 1" down from both plug ends. Your cord is now in compliance with our 3rd quarter's Assured Grounding Conductor Program. The red tape shall remain in place from 7/1/19 through 9/30/19. You are not quite done yet! All employees now need to visually inspect all electrical cords and tools on a daily basis and if any defects are found, the cord or tool needs to be immediately removed from service.

Thank you for taking the time to ensure your electrical tools and cords are in safe working order. Your actions may prevent one of our family members from sustaining an electrical shock type injury or worse yet and electrocution. If you have any questions regarding our Assured Grounding Conductor Program, please call our Safety Director, Peter Graham, at (847) 417-1689.

Have a Safe Day!

Emmanuel Calvillo - Employee of the Week at Cook County Renovation!

Good morning IDI employees,  

We have another employee getting some safety recognition.  Carpenter, Emmanuel Calvillo, was chosen as the employee of the week by Walsh Construction at the Cook County Hospital Renovation job site.  Emmanuel earned this recognition by playing a pro-active role in the safety culture at this job site.  

Way to go Emmanuel, way to make IDI proud!  

Emmanuel gets it - mentioning that he works safe so he can "enjoy time with his family." 

Whenever you see Emmanuel, please congratulate him.

Have a Safe Day!